You don't need to connect LIO board until get correct value for PPBUS_G3H, 8.4-8.5V.
Check SMC_PM_G2_EN, SMC_ADAPTER_EN, PM_SLP_SUS_L, PM_BATLOW_L.
Check SMC_PM_G2_EN, SMC_ADAPTER_EN, PM_SLP_SUS_L, PM_BATLOW_L.
-
For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.Subscribe Now
820 3208 - no green light, liquid damage
- Thread starter Atomrepair
- Start date
Atomrepair
Member
SMC_PM_G2_EN 0V, 19KOhm
SMC_ADAPTER_EN 0V, 10KOhm
PM_SLP_SUS_L 0V, 97.8KOhm
PM_BATLOW_L. 20mV, 7.1MOhm
Had some trouble figuring out where SMC_ADAPTER_EN was generated, as the 820-3208 pdf shows it as an INPUT for the SMC. Checked a pdf for another one and found out its actually generated by the SMC...
SMC_ADAPTER_EN 0V, 10KOhm
PM_SLP_SUS_L 0V, 97.8KOhm
PM_BATLOW_L. 20mV, 7.1MOhm
Had some trouble figuring out where SMC_ADAPTER_EN was generated, as the 820-3208 pdf shows it as an INPUT for the SMC. Checked a pdf for another one and found out its actually generated by the SMC...
Check basic SMC voltages and signals; block (2 of 2) on page 40.
Also check PCH's RTC signals.
C1802/03 fail a lot on this board.
Also check PCH's RTC signals.
C1802/03 fail a lot on this board.
Atomrepair
Member
I was missing PP3V3_S5_AVREF_SMC, but it turns out U5010 was missing from the board. Placed one on the board which restored it, but not done yet. Current measurements: [TABLE="border: 0, cellspacing: 0"]
[TR]
[TD="align: left"]SMC_PM_G2_EN[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"]19k[/TD]
[/TR]
[TR]
[TD="align: left"]SMC_ADAPTER_EN[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"]10k[/TD]
[/TR]
[TR]
[TD="align: left"]PM_SLP_SUS_L[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"]97,8k[/TD]
[/TR]
[TR]
[TD="align: left"]PM_BATLOW_L[/TD]
[TD="align: left"]20mV[/TD]
[TD="align: left"]7,1M[/TD]
[/TR]
[TR]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]C1802[/TD]
[TD="align: left"]3,4V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]C1803[/TD]
[TD="align: left"]3,4V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]PP3V3_S5_SMC[/TD]
[TD="align: left"]3,4V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]PP3V3_S5_AVREF_SMC[/TD]
[TD="align: left"]3,3V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]PP1V2_S5_SMC_VDDC[/TD]
[TD="align: left"]1,19V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]SMC_RESET_L[/TD]
[TD="align: left"]3,4V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]SMC_WAKE_L[/TD]
[TD="align: left"]3,1V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]SMC_CLK32K[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]SMC_EXTAL[/TD]
[TD="align: left"]1,2V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]SMC_XTAL[/TD]
[TD="align: left"]0,2-0,5V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]U1800[/TD]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]PM_PWRBTN_L[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"]26KOhm[/TD]
[/TR]
[TR]
[TD="align: left"]PM_SYSRST_L[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"]20KOhm[/TD]
[/TR]
[TR]
[TD="align: left"]PM_RSMRST_L[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"]108KOhm[/TD]
[/TR]
[TR]
[TD="align: left"]PLT_RESET_L[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"]7MOhm[/TD]
[/TR]
[/TABLE]
PP3V3_S5 is at 0V. I though it was present because PP3V3_S5_SMC was there, but I see the two arent directly related. I'll see if I can find out why PP3V3_S5 isnt there next.
[TR]
[TD="align: left"]SMC_PM_G2_EN[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"]19k[/TD]
[/TR]
[TR]
[TD="align: left"]SMC_ADAPTER_EN[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"]10k[/TD]
[/TR]
[TR]
[TD="align: left"]PM_SLP_SUS_L[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"]97,8k[/TD]
[/TR]
[TR]
[TD="align: left"]PM_BATLOW_L[/TD]
[TD="align: left"]20mV[/TD]
[TD="align: left"]7,1M[/TD]
[/TR]
[TR]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]C1802[/TD]
[TD="align: left"]3,4V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]C1803[/TD]
[TD="align: left"]3,4V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]PP3V3_S5_SMC[/TD]
[TD="align: left"]3,4V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]PP3V3_S5_AVREF_SMC[/TD]
[TD="align: left"]3,3V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]PP1V2_S5_SMC_VDDC[/TD]
[TD="align: left"]1,19V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]SMC_RESET_L[/TD]
[TD="align: left"]3,4V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]SMC_WAKE_L[/TD]
[TD="align: left"]3,1V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]SMC_CLK32K[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]SMC_EXTAL[/TD]
[TD="align: left"]1,2V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]SMC_XTAL[/TD]
[TD="align: left"]0,2-0,5V[/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]U1800[/TD]
[TD="align: left"] [/TD]
[TD="align: left"] [/TD]
[/TR]
[TR]
[TD="align: left"]PM_PWRBTN_L[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"]26KOhm[/TD]
[/TR]
[TR]
[TD="align: left"]PM_SYSRST_L[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"]20KOhm[/TD]
[/TR]
[TR]
[TD="align: left"]PM_RSMRST_L[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"]108KOhm[/TD]
[/TR]
[TR]
[TD="align: left"]PLT_RESET_L[/TD]
[TD="align: left"]0V[/TD]
[TD="align: left"]7MOhm[/TD]
[/TR]
[/TABLE]
PP3V3_S5 is at 0V. I though it was present because PP3V3_S5_SMC was there, but I see the two arent directly related. I'll see if I can find out why PP3V3_S5 isnt there next.
U7201 will not work until SMC_PM_G2_EN appears.
Try a known good SMC from other 3208 board...
Try a known good SMC from other 3208 board...
Atomrepair
Member
Thanks man. Will do as soon as I get my hands on one.
Atomrepair
Member
Haven't been able to find a 3208 yet, so I''ll wait until one comes along. I did, as a test, place an SMC from an 3209. Logicboard works fine after that, so its safe to assume that itll work with a 3209 SMC just as well. Feel free to mark this solved and thanks for the help!
At least run ASD and see if some error pops out...
Atomrepair
Member
Already did. there are no errors, but I'm told the firmware on this SMC is slightly different and may cause software issues in the future. I already have a functional original board lying around now. Just to be sure, I'll keep the one with the wrong SMC and give the one with the proper SMC to the customer. Then, when I come across the right SMC, I'll place that. Or, I'll just keep the board as is and use it when I need to test stuff.