pipsystems
Member
drawing 20mA
PPbus_g3h is 8.4V
pp3v42 is present
pp5v_s5 is present
pm_slp_s4 is missing, not sure where to fix
PPbus_g3h is 8.4V
pp3v42 is present
pp5v_s5 is present
pm_slp_s4 is missing, not sure where to fix
-
For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.Subscribe Now
820-3209-A A1466 2012
- Thread starter pipsystems
- Start date
What about 3V3_S5/SUS?
Post level for all RTC signals.
Post level for all RTC signals.
pipsystems
Member
rtc_reset_L 3.3V
pch_srtc_srt_L 3.3V
pch_intruder_L 3.06V
pch_intvmen 3.23V
3v3_s5 3.33V
3v3_sus missing
pch_srtc_srt_L 3.3V
pch_intruder_L 3.06V
pch_intvmen 3.23V
3v3_s5 3.33V
3v3_sus missing
Check S5_PWRGD, PM_DSW_PWRGD, PCH_DSWVRMEN and PM_BATLOW_L.
pipsystems
Member
S5_PWRGD 3.41V
PM_DSW_PWRGD 3.42V
PCH_DSWVRMEN 3.22V
PM_BATLOW_L 40mV
PM_DSW_PWRGD 3.42V
PCH_DSWVRMEN 3.22V
PM_BATLOW_L 40mV
PCH will not start power on sequence without correct PM_BATLOW_L.
Try to start with both charger and battery connected.
Battery is charged at least?
Be sure to have original Magsafe charger.
Also try to start in SMC bypass mode.
Try to start with both charger and battery connected.
Battery is charged at least?
Be sure to have original Magsafe charger.
Also try to start in SMC bypass mode.