bruce1129
New member
820-3209-A liquid damage, powers on, chimes, turns off after 3-5 seconds
board gets warm
if you remove the ssd, it will not power off after 3-5 seconds
if you try to boot from usb, it will power off again though
to be clear, if you remove the ssd it will stay on
fan seems to run high
my question is, should i assume there is a problem on an S0 rail since it does power on, then shut off (but only with ssd or trying to boot from usb)
i dont see any obvious liquid damaged components, it may have been cleaned before getting to me ( i bought it off ebay with the symptoms listed to practice motherboard repair on)
board gets warm
if you remove the ssd, it will not power off after 3-5 seconds
if you try to boot from usb, it will power off again though
to be clear, if you remove the ssd it will stay on
fan seems to run high
my question is, should i assume there is a problem on an S0 rail since it does power on, then shut off (but only with ssd or trying to boot from usb)
i dont see any obvious liquid damaged components, it may have been cleaned before getting to me ( i bought it off ebay with the symptoms listed to practice motherboard repair on)
PPBUS_G3H | 8.16v |
PP3V42_G3H | 3.42 |
dc in | didnt measure |
SMC_BC_ACOK | 3.397 |