Computer appears to start, then trips out.
Bench PSU shows draw from .25ma to approx 1amp after 1 second. which then resets and starts again.
Client says it sometimes turns on normally.
Some kind of over voltage protection or a shorted component tripping a circuit?
Not sure where to start with this one
820-3332-a
Bench PSU shows draw from .25ma to approx 1amp after 1 second. which then resets and starts again.
Client says it sometimes turns on normally.
Some kind of over voltage protection or a shorted component tripping a circuit?
Not sure where to start with this one
820-3332-a
