820-3435 No green light after liquid damage

EMS05

New member
Hello, I'm working on an 820-3435 motherboard with no green light

pp3v42 circuit was heavily corroded, some VIAs were destroyed. All corroded components replaced, jumpers ran to repair damaged traces

I occasionally get an orange light (never green), but in the rare instances I get it it disappears soon after

PPDCIN_G3H is 15.11v (measured on R7012)
DCIN_ISOL_GATE_R is 14.88v (Measured on C7012)
PPDCIN_G3H_ISOL is 0v

Replaced Q7010, no change

PPBUS_G3H is 0v
PPVRTC_G3H is 0V

PPBUS_G3H was originally dead shorted to ground, hooked up a bench power supply at 1v to inject voltage, as soon as I turned it on the short disappeared. It was quick enough for the power supply to not show an amp draw, but limit was 2A
 

2informaticos

Administrator
Staff member
Glad to hear is solved.

BTW, write directly into bottom reply box, instead of clicking Reply button.
I don't see any reason to quote an entire post, visible few centimeters above.
 
Top