820-3437 Missing PM_SLP_S5_L

brunomotter

Member
Hello. Got this board here that had been messed on another shop. Missing PM_SLP_S5_L. There were some missing components and some bad resistors underneath CPU and R1905 was missing which I replaced. I get stable 8.56V on PPBUS and stable 3v3_S5 power rail but no PM_SLP_S5_L. Which signals exactly are needed to create it?
 

2informaticos

Administrator
Staff member
PM_SLP_S5_L will stay low, until board exit from S5 state.
Do you get 3V3_SUS?
 
Last edited:
Top