820-3437

[suzukigsxr1000r]

Has liquid damage , after cleaning it will turn on , light comes
on the charger , then light on the charger disappear after few 20-30 seconds . The charger goes to protection status , I must
unplug it from wall to work again .
i replaced I/o board and the flex cable , checked J9500 all pins
are clean inside and outside the connector .
replacec battery . Still doing same .

 

[BCN_Techs]

light disappear but still charging?

 

[2informaticos]

Post exact PPBUS_G3H and 3V42 voltage.
Try it with lab power supply, or fake charger.
Measure R7180/81 and R7185/86 onboard, 200K scale; should discard Q7180 issue.
Check Q7010, D7012 and voltages in that area.