820-3476 not recognizing SSD

bjf

Member
This was not liquid-damaged. Just stopped recognizing SSD's. Tried a bunch. No change. Any idea what would cause something like this? Not seeing anything off yet.
 

JohnB8812

New member
Check voltages on the SSD connector especially pins 1, 8, 24, and 47. You do not need an SSD plugged in to measure.
 

2informaticos

Administrator
Staff member
First start with USB OSX and check if Disk Utility sees the SSD at least.
Just in case is a problem with APFS and BIOS; is better to discard that first.

Next, post U3740 voltages.
Be sure U8070 and L3700 are good.
 

bjf

Member
Thanks, that got me there. Had some crud on the back of the connector on pin 47 that the ultrasonic didn't get. Wasn't getting voltage because of that. Working now.
 
Top