Palhano
Member
Logic board with no history. But perfect, without oxidation.
There was a short on the PPBus because of the Q7430. Replaced it, board turned on again, but with RAM beeping.
I have 1.35v on PP1V35_S3, but when I test it off, it shows as a short (023.1), in 0.040 diode mode.
I compared it with another board, diode mode is 0.110 and there is no short on this line.
There was a short on the PPBus because of the Q7430. Replaced it, board turned on again, but with RAM beeping.
I have 1.35v on PP1V35_S3, but when I test it off, it shows as a short (023.1), in 0.040 diode mode.
I compared it with another board, diode mode is 0.110 and there is no short on this line.
