Are you using original Magsafe 2 charger?
Don't use 1-->2 adapter.
Same thing on battery only?
Don't use 1-->2 adapter.
Same thing on battery only?
Last edited:
-
For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.Subscribe Now
820-3476 randomly not getting P3V3S0_EN
- Thread starter bjf
- Start date
bjf
Member
Yes, the same original 85W MagSafe 2 power adapter I always use.
I noticed that PM_SLP_S3_L does come up once every time I plug it in and drops down immediately.
I tried it with battery-only a number of times and it was turning on normally. But after going back to trying it on adapter-only, it's also working consistently now so I'm not sure it's telling me anything.
I noticed that PM_SLP_S3_L does come up once every time I plug it in and drops down immediately.
I tried it with battery-only a number of times and it was turning on normally. But after going back to trying it on adapter-only, it's also working consistently now so I'm not sure it's telling me anything.
If PM_SLP_S3_l pulse only once, could be SMC sensor issue.
If starts to fail again, check if always starts in SMC bypass mode.
If starts to fail again, check if always starts in SMC bypass mode.
If you get pulse on all coils, then can be any Isense, or Vsense sensor.
Less probable to be temp sensor...
Less probable to be temp sensor...