For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
Hi,
i have this board 820-3478 (clean), only 1 led with iMac supply.
I use an external power supply, I inject 12V on PP12V_ACDC, the current is 0,77A
I think it's too much, I have U2800 is very hot, PP1V05_TBTLC=0,3V, I suspect U2800. PP3V3_TBTLC=3,3V.
have you an idea?
hi,
Q8470 is good, I have 12V_S5. and 8470 too.
PP3V42_G3H=3,41V, S3,S4,S5 is OK.
I have PM_EN_REG_P1V05_S0=0V why? need the real iMac power supply?
thanks
Hi,
sorry no I have 3,3V on pin 9 and 0V on pin 10.
I check that for the pin 10:
PM_EN_REG_GPU_VDDQ_S0 = 3,3V
PM_PGOOD_REG_FBVDDQ_S0 = PM_PGOOD_REG_FBVDDQ_S0 = 0V
PP5V_S0_REG_FBVDDQ=5V
I change U7750 but always same
L7710 = 0,0084V in diode mode, i compare with another same board (0,450V).
can I inject power? to find short? how can I do?
pins 19/20 of U7750 are OK (0,5V in diode mode)