Low readings is normal for onboard measurment.
Check if turns on always using 47K, instead of 100K.
Check if turns on always using 47K, instead of 100K.
-
For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.Subscribe Now
a1466 Powering issue
- Thread starter ohspecial1
- Start date
ohspecial1
Member
Hi
I will check i have removed the 100k resistor
Wondering if i should but a replacement in or to put a 47k in its place
When 100k resistor was still there everytime i used a 47k and put over the 2 legs fan powered
I will check i have removed the 100k resistor
Wondering if i should but a replacement in or to put a 47k in its place
When 100k resistor was still there everytime i used a 47k and put over the 2 legs fan powered
ohspecial1
Member
Hi
After spending quite a while an losing and blowing off the 100k replacement
Replaced 100k still same issue
After spending quite a while an losing and blowing off the 100k replacement
Replaced 100k still same issue
ohspecial1
Member
Hi removed j6100 what a battle should have used the air gun
We have knocked off r6122 spi_mosi, spi_mlb_ioo_mosi
Do you know if he plays a important roll as now j6100 has been removed fan doesnt spin at all
We have knocked off r6122 spi_mosi, spi_mlb_ioo_mosi
Do you know if he plays a important roll as now j6100 has been removed fan doesnt spin at all
Did you resolder R6122?
"fan doesnt spin at all"
SMC_RESET_L goes high?
Did you solder 47K, or 100K in place of R5100?
"fan doesnt spin at all"
SMC_RESET_L goes high?
Did you solder 47K, or 100K in place of R5100?
ohspecial1
Member
Hi
I currently have no r6122 i need to replace it from another board tommorow
When i changed r5100 i replaced it with a 100k from an older version of the same a1466
But wouldnt self start without a jump when replaced
So i removed j6100 what a mess that made
but i need to replace r6122 as it is missing
with him missing no fan movement or nothing so im guessing he plays a big role
I currently have no r6122 i need to replace it from another board tommorow
When i changed r5100 i replaced it with a 100k from an older version of the same a1466
But wouldnt self start without a jump when replaced
So i removed j6100 what a mess that made
but i need to replace r6122 as it is missing
with him missing no fan movement or nothing so im guessing he plays a big role
ohspecial1
Member
I will check tomorrow but when measured pin 12 on j6100 now he is removed 3.37v but i will double check tomorrow