A1502 - no power, 19.5v drawing about 1.3-1.6a, current draw very slow falls

tawnytim

Member
I've tried disconnecting the battery but no luck there. This machine will start out drawing about 1.3a, then slowly, start dropping at about 1ma/second. SSD memory controller gets hot, but CPU does not feel warm, no fans. I connected the Chipmunk tester and I have two solid red lights, but no green USB light. Power adapter starts off green, then turns amber. Very odd.

Drawing 222ma with battery disconnected, power adapter connected. This draw does not change, constant 222ma.
 
Last edited:

tawnytim

Member
I'm assuming the 1.052 coil is the CPU. No history either, but most of my customers don't tell me the truth.
 

Attachments

  • rossmann.png
    rossmann.png
    406.3 KB · Views: 2
Top