hgoncalves
Active member
Hi,
I have an A2141 820-01700 with no power, and only 5V on ampmeter.
It had bit of water contact on the right side, and doesn't power on.
After a quick check, I notice that PPBUS_G3H was shorted, and there was a bit corrosion on U9580. After removing U9580 short on PPBUS_G3H is gone, and have 20V on ampmeter, and 0.27A, but still no power on.
P2V5_SW2_TPS62180_SSD0 (on L9581) has 0.001 on diode reading, but I don't know if it is because I've removed U9580.
Can you help?
I don't have any other A2141 board to replace U9580.
Can I use other mac board model to get this U9580?
TKS
I have an A2141 820-01700 with no power, and only 5V on ampmeter.
It had bit of water contact on the right side, and doesn't power on.
After a quick check, I notice that PPBUS_G3H was shorted, and there was a bit corrosion on U9580. After removing U9580 short on PPBUS_G3H is gone, and have 20V on ampmeter, and 0.27A, but still no power on.
P2V5_SW2_TPS62180_SSD0 (on L9581) has 0.001 on diode reading, but I don't know if it is because I've removed U9580.
Can you help?
I don't have any other A2141 board to replace U9580.
Can I use other mac board model to get this U9580?
TKS
Last edited:
