A2289 Stuck in DFU mode

[yobad]

Hello, I have A2289 when i restore i get error 4010, and when i try to revive i get error 75, the board was working before restore. But i changed the housing.

 

[yobad]

 

[2informaticos]

Connect charger cable before DFU cable.
Be sure machine continues to take current from charger, once DFU cable is connected.

 

[yobad]

Connect charger cable before DFU cable.
Be sure machine continues to take current from charger, once DFU cable is connected.

I did, it consume 19v and 0.052A, and it continue when the dfu cable
Is connected

 

[2informaticos]

AC2 shows it in DFU, or Recovery?

Check for knocked off components, broken trace, or damaged connectors.
What was the problem after changed in other housing?

 

[yobad]

DFU mode and when i try to revive it enters Recovery then i force it to DFU another time.
There was no problem till i tried to restore, then it did this error before the restore, i turned on normally.

 

[2informaticos]

You may need to try more times; sometimes completes DFU after days of trying.
Also test another cable and host machine; with different macOS installed.

You can also try with empty SoC ROM.
Don't forget to make a backup first...