Instafixx
Member
Board Stuck at 20V.
Trackpad Clicking. No Caps Key Toggle. No Touchbar. No Chime. No Boot.
Only Board on Bench.
Some Corrossion at the Caps below J5260.
Cleaned them. Not Shorted but Voltage is Cycling.
USB_TA_CC2 is cycling from 0V to 1.8v (When plugged in to the same side C Port)
HALLSENSOR_RIGHT is stable at 3.4V
PPBUS_G3H is 13V.
While checking Voltages the Machine goes very hot.
On the Thermal Camera its the CPU that goes upto 100 Degree Celcius with the adapter connected.
Trackpad Clicking. No Caps Key Toggle. No Touchbar. No Chime. No Boot.
Only Board on Bench.
Some Corrossion at the Caps below J5260.
Cleaned them. Not Shorted but Voltage is Cycling.
USB_TA_CC2 is cycling from 0V to 1.8v (When plugged in to the same side C Port)
HALLSENSOR_RIGHT is stable at 3.4V
PPBUS_G3H is 13V.
While checking Voltages the Machine goes very hot.
On the Thermal Camera its the CPU that goes upto 100 Degree Celcius with the adapter connected.