Macbook A2179 820-01958

Instafixx

Active member
U7800 was heting up.
Replaced and device turns on.

But i get the Back Screen :Macbook Restarted because of a problem"

tried DFU and multiple software restores.
It sometimes restarts at the apple logo - sometimes after inputting password.
Fan goes high.

I disconnected all components one by one to rule out peripheral issue.
without LCD connected on an external display device worked - i got a Kernel Panic Message saying "Third party kernel was not allowing the machine to boot and that it was disabled"

Thermal camera shows nothing getting hot
 

2informaticos

Administrator
Staff member
Try new installation with just external screen connected.

You can also test the machine disconnecting only camera from T-CON board; keeping internal LCD connected.
 
Top