Instafixx
Active member
Macbook A2337 Camera Issue
Device was stuck in Round Logo with a slash inside it (Recovery or No Software).
Water Damage as the small audio board. Cleaned it. Turns on now.
Had to replace the trackpad flex cable as well.
Everything fine now except "No Camera Connected".
PP5V_MAIN_ALSCAM_F is 5V
I2C_CAM_SDA/SCL lines surrounding UD120/140 also ok.
Getting 0.5V at LP607 and LP609
Replaced the TCON board as well.
Tried a different LCD assembly too.
Device was stuck in Round Logo with a slash inside it (Recovery or No Software).
Water Damage as the small audio board. Cleaned it. Turns on now.
Had to replace the trackpad flex cable as well.
Everything fine now except "No Camera Connected".
PP5V_MAIN_ALSCAM_F is 5V
I2C_CAM_SDA/SCL lines surrounding UD120/140 also ok.
Getting 0.5V at LP607 and LP609
Replaced the TCON board as well.
Tried a different LCD assembly too.
Last edited: