Macbook Air 820-00164-A no Cam after SSD upgrade

[1phone.cl]

Hi, i have a Macbook Air that the camera stopped working after a ssd drive change, i tried with smc and nvram restart and another 2 cameras and still doesn't work,
with a external usb camera works good

Volts J4002
Pin 12 5V
Pin 11 0.9V
Pin 10 0.9V
Pin 9 3.2V
Pin 8 3.2V
Pin 6 to 2 0V

 

[2informaticos]

Did you install some kind of patched macOS?
I saw this happened after unsuported macOS installed with OpenCore Legacy Patcher.

 

[1phone.cl]

No, the Macos installed is the original Monterrey compatible with that model, i installed the older ssd and the camera still doesn´t work

 

[2informaticos]

If USB macOS can access camera, then you have a software problem.

 

[1phone.cl]

ok got it, will tried to solve in that way, thank you

 

[1phone.cl]

Hello, I have restored the system several times with different Macos and still the camera does not recognize it.

 

[2informaticos]

Camera still works with USB macOS?

 

[1phone.cl]

Yes the usb cam work good, the internal doesn't

 

[2informaticos]

Wait, do you mean an USB camaera works?
My fault, I supposed that internal camera works testing with an external USB macOS.

Check voltages and diode mode to ground on camera connector; w/ and w/o camera connected.
Compare values with similar board.

What error do you get, starting in diagnostic mode?
ALS works?