MacBook Air M3 - M4 DFU Restore Onboard

[No-Clean]

I'm trying to put a MacBook Air M4 in DFU mode using the onboard pads SWV011 (SOC_FORCE_DFU_DBG to PP1V25_S2) following the same steps here https://logi.wiki/index.php/DFU_Mode_Restore_(Macs)#How_to_put_Mac_into_the_DFU_mode but no luck, Im doing this with board alone on bench, using both power cable and DFU restore cable

Any advice will be greatly appreciated

 

[2informaticos]

What board is?
What is the problem?

 

[No-Clean]

Thanks, I am trying to restore after NAND replacement so I can do it on bench and not have to mount board, I tried all kinds of ways and no luck.

 

[2informaticos]

If you replaced the NANDs, machine should automatically enter in restore mode.

 

[No-Clean]

The reason I am here is because that is what I was expecting, but not in this model, I tried with another one that is also working, but same problem. I will report back if I get any findings.