For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
I replaced KBC. Now it power up and got video but only works without RTC battery. If I put rtc battery doesnot power.
I have another L850 and already tried another power button and cable and I checked 3V goes to 0 when power button is pressed.
it is PLF/CSF schematic but there is no schematic for this board.
I can shutdown this board from power button. I just cannot power the board.
I replaced KBC again and all the same.
You are the Master, yes. Pretty easy to find LID in this board. It connec to pin 75 and it was on 0.6V. I force it to 3.3V but all the same. Then I found out that KBC 775 I put is version P and original one is version L. Then I replaced KBC again and now it works and I have 3.3V in pin 75 - LID
I also compared all 128 pins between both KBC and there were 7 different. Now it works. Thanks Duke