Search results

All still available as of right now; please message me to discuss pricing. If possible, please just include offer amounts in the message for the model(s) you're interested in. Boards are all excellent repair candidates, so no heavy-liquid damage, no physically damaged PCB or anything, no...

Also, to clarify: These are not "parts" boards. These are boards with a very high chance of repair, not ones we've picked through and discarded. These are directly from our stock of repairable boards.

We could arrange international shipping, but would ask you to cover the costs. These boards can get heavy when we ship 50+, so the cost is likely to be quite high. I'll try to PM you now--thanks!

We have too many boards! We have inventory that's dying on the vine because we simply don't have the time or manpower to repair them all. In addition, we're also rolling over stock and clearing out some older model boards. Before we slaved away to get them all listed on eBay or sold to our...

Make sure your trackpad and trackpad cable are both working and not gunked up. These units will boot to the software update if there's a problem with the trackpad, FYI.

Board is (and was) not working with that damage. It happened recently, possibly from a surge on 3v3_s5 or via audio circuit. That's not the GPU, it's the PCH. RIP your board unless you feel like replacing it and cleaning the BIOS.

Has there been any news/progress or solutions to pairing a new TouchID power button with a 2016/2017 A1706 or A1707 board? Have had three occasions now where it would be helpful to do. Any recommended methods for repairing a torn Cable? Traces are incredibly small and tightly packed; seems...

Yep, same issue. I can get it to work ~50% of the time...on working boards and/or boards that power on. If a board doesn't power on, it works 0% of the time. Pretty unfortunate, as one of the videos for the unit clearly shows it connecting to and working with a totally-shit parts board from...

Just picked up a Medusa 2, and I must say I'm a bit disappointed with the limited testing I've done. The first ~10 boards (parts boards, albeit, but all with SPI present and no damage or missing components or anything to that area of the board) or so that I tried to simply read the serial/BIOS...

That's the confusing part--no shorts and PPBUS is present, but board is still drawing no A/W. Was hoping someone may have seen this before. :(

Have seen two Touchbar boards in the past few weeks, each with the same symptoms: Zero damage to the board, 20v on USB-C input, but 0a and 0w being drawn. Have not seen this prior to these 2 units, but now both are showing this symptom. Have confirmed it's not a charger issue (other boards work...

Bit of a newb question here, but what all is required by the SMC on this model to actually produce SMC_PM_G2_EN? I replaced U7800 and no dice, exact same behavior. Curious if I'm missing an input for SMC that should be present. These touchbar boards really throw me for a loop.

Sure thing, thank you; I'll try that. I may even just replace U7800 since I'm having to pull it, and I have spares. Will try that and let you know--thank you!

Sounds good, I'll do that. But quick question: Obviously I don't want to apply power with U7800 removed; how should I check if signal comes high with U7800 removed?

I can't tell if battery is charging; how would I determine that with no board life? I have 0W/0A draw on all USB-C ports. If the SMC isn't at fault for the missing SMC_PM_G2_EN, what else should I be looking at? Could U7800 be pulling SMC_PM_G2_EN down, which is why it's missing? Would love to...

Yes, definitely using a proper 87W charger for all testing. Any other ideas?

Clean 00239, no liquid, with no power. Board has ppbus (13.2v) and 20v on USB-C power input (0W/0A draw), but not much else. SMC_PM_G2_EN is missing completely. Thought it might be the SMC since signal was missing completely, but replaced SMC and symptoms persist. Also replaced U7650 to be safe...

Working on a liquid-damaged 00923. Board had a spill to the right-hand-side, took out one CD3215 and the USB-C assembly on that side. Replaced the controller and USB-C assembly and the board/unit is working well, with the exception of one thing: one port on the LEFT side of unit (opposite of...

Reflow GMUX.

This is a normal issue with Mojave and maybe even High Sierra. Don't worry about what the icon shows until logged into MacOS. It's very common.