Search results

Hi, USB-C shows 20V with cycling amperage from 0 to 0.025A D6905: pin 1: 1mV pin 2: 20.5V R7030 shows pp3v3 is at 3.39V L7030 is at 12mV

Board powers on and boots fine with charger, known good batteries display 0%, dies, and it does not charge. Corrosion around C1204, and U6101 area I tested the continuity on U6101 and all the connections seem to be fine still

The apple logo looks fine when it loads, then after it's done loading, the screen starts sporadically making boxes all over the screen.

Hi, I have a board that is only drawing 5V on all USB-C ports getting 0.168A on two ports, then 0.134A on one port, then 0.026A on another. After taking out the board and ports it appears one of the ports on each side is covered in junk. I am currently using a fresh port and getting 0.137A I do...

Hi, I had a macbook A1466 with corrosion all around U1930. It was originally drawing 30mA. After replacing both resistors and U1930 it attempts to turn on drawing around 130mA with the fan spinning full blast PPbus_g3h @ 8.6 present 5v_s4 @ 5.1 present 3v3_s5 @ 3.33 present ppddr_s3 @ 1.2...

Board boots fine, just unbearably slow and high fan spin. No signs of corrosion 820-3536-A

drawing 20mA PPbus_g3h is 8.4V pp3v42 is present pp5v_s5 is present pm_slp_s4 is missing, not sure where to fix

Hi, I have a board with no power, Draws 16-17mA ppbus_g3h = 12.6V U7201: 3v3s5_en =3.4V pp5v_s5 = 5V p5vp3v3_vref2 = 2V 3v3s5_comp2 = 1.8V P3v3s5_VFB = 1.1V It seems all the 3.3 Rails are coming up short, am I right?

Hi, I was to preface by saying I do not know how these newer boards work. I had a cap that blew and I replaced it on this board, I do not have the schematics so I can not say specifically. I have attached a picture of the cap though. Connecting this board to a USB-C meter it successfully goes...

Hi again, I have an A1502 board that started at 26mA for a while, I was testing voltages and at some point, it jumped to 150mA I was originally missing PP5V_S4 on L7520 but then once it jumped to 150mA it was present. L7320 & L7310 seem a little low at 1.7V instead of 1.8V? U1950 there is no...

Hello, USB-C meter does not power on, board appears bone dry CD3215 chips both produce 3.3V and no unusual heat under thermal camera injecting 1-8.6V into ppbus_g3h produces no amperage D6905 Measurements: 1) 500mA -> Slowly decreasing (PPBUS_G3H) 2) 100mV -> Stable please help me I'm...