nik1981
Member
I have an 820-00165 with no fan spin after liquid damage.
Orange light and SMC reset goes green and back to orange.
Liquid damage around U5110 cleaned up.
PPBUS_G3H = 8.52v
PP5V_S5 = 4.98v
PP3V3_S5 = 3.32v
PM_SLP_S4_L = 0v
SMC_PM_G2_EN = 3.4v
PPVRTC_G3H = 3.3v
PM_DSW_PWRGD = 3.4v
PP3V3_SUS = 3.301v
PPBUS_S5_HS_COMPUTING_ISNS = 8.53v
R1300 pin1 = 3.302v - pin2 = 3.296v
R1301 pin1 = 3.302v - pin2 = 3.030v
R1302 pin1 = 3.302v - pin2 = 3.208v
R1303 pin1 = 3.302v - pin2 = 3.296v
JTAG obviously removed, replaced the burnt LVDS connector.
I’m not sure where to go from here.
Orange light and SMC reset goes green and back to orange.
Liquid damage around U5110 cleaned up.
PPBUS_G3H = 8.52v
PP5V_S5 = 4.98v
PP3V3_S5 = 3.32v
PM_SLP_S4_L = 0v
SMC_PM_G2_EN = 3.4v
PPVRTC_G3H = 3.3v
PM_DSW_PWRGD = 3.4v
PP3V3_SUS = 3.301v
PPBUS_S5_HS_COMPUTING_ISNS = 8.53v
R1300 pin1 = 3.302v - pin2 = 3.296v
R1301 pin1 = 3.302v - pin2 = 3.030v
R1302 pin1 = 3.302v - pin2 = 3.208v
R1303 pin1 = 3.302v - pin2 = 3.296v
JTAG obviously removed, replaced the burnt LVDS connector.
I’m not sure where to go from here.