820-01598-A not turning on 20V

BCN_Techs

Member
Good afternoon, guys.

The MacBook had gotten wet, the damaged components have already been replaced (including CD3217), it manages to go up to 20V - 1.30A but it resets to 0A.
Reviewing the Power sequencing diagram, the voltages reach the part of H9M LOAD SECURE ROM, SMC BATTERY TRAP: the last voltage before the restart, is the PCH_RTC_RESET_L; from there, there are no more voltages.

PPBUS = 12.57

Thanks and regards.
 

2informaticos

Administrator
Staff member
Did you try revive, or restore option?
Be aware, restore will erase SSD; but must be needed.
 
Last edited:

2informaticos

Administrator
Staff member
Bad T2, or SSD probably.

Please, do not quote an entire post visible few centimeters above; any reason do that?
 
Top