820-01700 Charge issues

[No-Clean]

Clean board, Mac turns on, shows charging icon and battery icon, but as soon as the charger is disconnected, the Mac turns off.

U7000 replaced and same problem.

J6951 diode readings are on par with known good board.

New battery same problem.

 

[2informaticos]

Tested with 96/140W charger?

 

[No-Clean]

Yes original Apple and same thing

 

[2informaticos]

Just for test, bypass R6950 pads.

 

[No-Clean]

I assume I have to make a bridge from SYS_DETECT_L to ground?

 

[2informaticos]

Yes...

 

[No-Clean]

Same thing even with new battery and different charger, new battery has 60% charge and as soon as cable is unplugged Mac turns off.

 

[2informaticos]

So with charger connected only shows low battery icon?
Doesn't go to progress bar?

 

[No-Clean]

No, it shows 60% and charging icon but it does not charge

 

[2informaticos]

Did you try another battery data cable?
Be sure it is correctly connected.
Also check if battery screw is tighten.

 

[No-Clean]

Yes and today I tried revive T2 as well but no luck

 

[No-Clean]

Any other suggestions @2informaticos

Thanks

 

[2informaticos]

What said the customer about how the fault appeared?

 

[No-Clean]

Just that he rarely ever disconnects the charger, we tried 2 different known good bakeries too

 

[2informaticos]

May need to try restore, instead of revive.
Save data first...