820-02016-A 5V 0.008A C5278 burned

[mbcontrol]

The board stuck at 5V and 0.0079A. There is no liquid damage. The cap C5278 was burned out (had a real hole).
I changed C5278 and C5222 and U5200
PPVBAT_AON_CHGR_REG have now 0,5v (diode mode)
PPBUS_AON have only 1.1v
What would you do next?

PS: is not in DFU mode

 

[2informaticos]

Remove F5200 and check C5254 voltage.

 

[mbcontrol]

I removed F5200. The voltage at C5254 is cycling 2.2v down to 1.1v every 2-3 seconds

 

[2informaticos]

Post U5200's basic voltages: P_IN, AUX_DET, SMC_RST_IN, VDD/P, EN_MVR, AUX_OK, A/BMON.

 

[mbcontrol]

Here are the voltages of U5200 (F5200 still removed) ...
P_IN = 5.17v
AUX_DET = 1.28v
SMC_RST_IN = 0.03v
VDD = 5.10v
VDDP = 5.10v
EN_MVR = 0.00v
AUX_OK = 1.03v
AMON = 0.03v
BMON = 0,00v

 

[2informaticos]

You should try to change U5200.

 

[mbcontrol]

I changed U5200 before and the soldering should be ok.
should I do it again?

 

[2informaticos]

Check first R/C/Q5230/40 and their traces.