it-solve
Member
Hi Guys, this board had liquid damage after cleaning and removal of a bunch of burned PP3V8_AON_MPMU_ISNS_VIN filter caps, it turned on.
But now it's stuck at 5V 0.01A and I measure short (0.55Ohm) between C81D7 and C81H1. Seems to be in/out of the U8100.


Anything else I can do? I have a donor board from where I may be able to get U8100, but seems an awful work without a stencil. Also not sure if that's performant there.

Anything I can check?
Thanks
But now it's stuck at 5V 0.01A and I measure short (0.55Ohm) between C81D7 and C81H1. Seems to be in/out of the U8100.


Anything else I can do? I have a donor board from where I may be able to get U8100, but seems an awful work without a stencil. Also not sure if that's performant there.

Anything I can check?
Thanks