huzeafa
Member
Hello guys.
Please I need help with a 16-inch 820-02100 board. The Board was working but would restart immediately after the OS started to load, it is the same thing when I try to press and hold down the power button to access recovery, I tried to restore the device in DFU MODE on multiple attempts, and I got error code suggesting a possible issue with the NAND, I then decided to replace the NANDS, this is not the first time I have replaced NANDS on this boards, I usually do a direct transfer from a similar board with similar NAND arrangements, for example, the board am currently working on, only has one side of the wing populated, hence I used a similar board. After installations, I am not able to restore the device, won't even go into DFU Mode, the MAG safe 3 cable connected keeps going on and off, as the device is circling, I thought might be the NAND, so I took a different set from a similar board, but the behavior remains the same.
Please I need help with a 16-inch 820-02100 board. The Board was working but would restart immediately after the OS started to load, it is the same thing when I try to press and hold down the power button to access recovery, I tried to restore the device in DFU MODE on multiple attempts, and I got error code suggesting a possible issue with the NAND, I then decided to replace the NANDS, this is not the first time I have replaced NANDS on this boards, I usually do a direct transfer from a similar board with similar NAND arrangements, for example, the board am currently working on, only has one side of the wing populated, hence I used a similar board. After installations, I am not able to restore the device, won't even go into DFU Mode, the MAG safe 3 cable connected keeps going on and off, as the device is circling, I thought might be the NAND, so I took a different set from a similar board, but the behavior remains the same.
