820-2849 PP5v_S5 low

[Jimmy Spangle]

This board has rabit hole problems. Solve one thing, another pops up.Not wasting any more time on it.

Thanks very much for your help.It is much appreciated buddy.

 

[Jimmy Spangle]

OK. Another day another try.

Replaced U7201 and also replaced Q7260 and Q7261 at the same time


U7201 pin 22 is 1.2v
U7201 pin 23 is 8.41v
U7201 pin 12 is 3.37v

C7205 is 0.77v

 

[2informaticos]

If pins 23 & 12 have correct voltage (your case), you must get VREG3/5 & VREF2.
So check for any other "NO STUFF" mistake around.
Be sure U7201 and new MOSFETs are all correctly soldered.

 

[Jimmy Spangle]

Everything is on correctly. That is the only thing I am sure of.

But like all boards where someone else has been playing beforehand, anything could be wrong. I am calling it a day on this board too.

I appreciate all YOUR help. I say yours as nobody else helped at all.

Maybe the forum would be better called then '2informaticos forum'.

Muchos Gracias Senior. Adios.

 

[2informaticos]

Not at all...
I'm learning, like many others.

The guy who "knows" is on vacations.
So patience and you may have more luck next week