It restarts every 15s?
Or just one time, then stays on?
VCORE is present?
PLT_RESET_L comes on?
Or just one time, then stays on?
VCORE is present?
PLT_RESET_L comes on?
-
For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.Subscribe Now
820-3209 No power
- Thread starter tipoti
- Start date
it doesn't restart right now it's pulling 0.64a won't boot
PPVIN_S0_CPUAXG = 8.36v
PPVCORE_S0_AXG_R = No Voltage
CPUIMVP_PHASE1G = No Voltage
CPUIMVP_LGATE1G = No Voltage
CPUIMVP_UGATE1G = No Voltage
PPVCORE_S0_CPU_REG = 0.75v
PPDDR_S3_REG = 1.3V
PCPUVCCIO_S0_REG = 1 Volt
PPVCCSA_S0_REG =0.78
PLT_RESET_L = 3.3V FİXED
PPVIN_S0_CPUAXG = 8.36v
PPVCORE_S0_AXG_R = No Voltage
CPUIMVP_PHASE1G = No Voltage
CPUIMVP_LGATE1G = No Voltage
CPUIMVP_UGATE1G = No Voltage
PPVCORE_S0_CPU_REG = 0.75v
PPDDR_S3_REG = 1.3V
PCPUVCCIO_S0_REG = 1 Volt
PPVCCSA_S0_REG =0.78
PLT_RESET_L = 3.3V FİXED
Don't waste time checking iGPU voltage; we explained so many times on the forum why.
As PLT_RESET_L comes on, power on sequence is completed.
Now may only have a communication issue on some bus, BIOS, or bad CPU, RAM.
Did you check USB activity?
Connect speaker, in case of RAM error beeps.
As PLT_RESET_L comes on, power on sequence is completed.
Now may only have a communication issue on some bus, BIOS, or bad CPU, RAM.
Did you check USB activity?
Connect speaker, in case of RAM error beeps.