A2337 MacBook Air Trackpad and Keyboard not working 820-02016

[Dozer]

is this possible?

I checked RT330

the value pin 1 open board is 0.209 my is 0.198 seems ok
pin 2 open board shows 0.515 my is 1

i desoldered the resistor and measured it, 98K seems ok. pin 2 on the board, desolderd still shows .500
I soldered it back and now it shows pin 1 0.198 pin 2 0.500

I assembled all together and now its working closing the lid several times , all ok.

is it possible that there was a bad connection? there was no liquid or anything to see

 

[2informaticos]

Very likely bad solder...

 

[Dozer]

bad news. the device was now sleeping about an hour and already same problem :-(

 

[2informaticos]

Check again that wake signal.
You may need to resolder UT330.

 

[Dozer]

I resoldered UT330 and to be sure UT365

from that moment no problems anymore, my guess like your UT330 had bad solder and from the heat of the soldering RT330 it was again working temporaly.

SOLVED