A2681 820-02536 no power

[hgoncalves]

Hi.

I have an A2681 820-02536 with no power (5V on ampmeter), and PP5V_MPMU_BSTLQ_XW is shorted.

C8432 was burnt and so I've removed. PP5V_MPMU_BSTLQ_XW remains shorted, so I think U8100 is the culprit.

Is it possible to replace U8100?

If so, do you know if I can use one from a different board model or where to buy it new?

 

[2informaticos]

Buy with confidence here:

A2681 U8100 PMU 343S00554 for 820-02536

A2681 U8100 PMU 343S00554 for 820-02536

www.masterliuonline.com

 

[hgoncalves]

Hi.

After replacing U8100 I still only have 5V and U8100 might not be the culprit.

PP5V_MPMU_BSTLQ_XW has 0.002 on diode reading, and I'm not sure if that´s a normal value.

Can you help?

 

[2informaticos]

"PP5V_MPMU_BSTLQ_XW has 0.002 on diode reading"
Not normal; did you check it once MPMU was out of board?

 

[hgoncalves]

Yes, I've checked it and it had the same value.

Can I safelly inject voltage?

 

[2informaticos]

If short without MPMU, then must be a bad capacitor.
Voltage injection method should help.