How do I bypass SPIDIF on 820-4924

[huzeafa]

hello guys, have got an 820-4924 with a red light coming out of the Audio jack, causing my speakers to grey out on desktop , please how do I disable this ?

 

[2informaticos]

Did you try to clean the audio jack first?
Check the contact between pins 1/2 of J6600.

 

[huzeafa]

yes I did

 

[huzeafa]

what should I look out for ? the solder joints are good

 

[2informaticos]

In normal mode, pins 1/2 must be in contact.
Do you get headphones sound?

 

[huzeafa]

YES I GET HEADPHONES SOUND

 

[2informaticos]

What about pins 1/2 contact???

 

[huzeafa]

yes contact is good , though am not entirely sure what you mean by contact, if you are talking about the joints , yes they are good

 

[2informaticos]

Pins 1/2 MUST beep, when nothing inserted on the audio jack...

 

[huzeafa]

beep as one or beep to ground ?

 

[2informaticos]

Did you look at audio jack in schematic?
What means for you the connection inside, between pins 1 & 2?
That connection MUST open only when something is inserted in the jack.
There is another connection which depends if insert headphones, or SPDIF.
But pins 1 & 2 start the detection...

 

[huzeafa]

ok, thank you for your time