[solved]820-3115 Battery indicator connector

[XooP]

Got a 820-3115 today that would not charge or run of the battery. The board was water damaged around the battery-indicator connector. Removed the connector and replaced the components around.
The board now runs fine and the battery is charging. My problem now is, where do I get hold of a new battery-indicator connector?

 

[JorgePayar]

http://www.ebay.es/itm/MacBook-Pro-...257299?hash=item4ad2259153:g:WbQAAOSwI-BWGNsd

 

[XooP]

I need the other end to be soldered to the motherboard.

 

[aprendiz]

Take it from a donor board, in order to remove the connector use a lot of flux and apply heat with hot air at max from the back of the connector....

 

[JorgePayar]

There we go:
http://es.aliexpress.com/store/produ...285571103.html
it seems to be the same one or as aprendiz said you can get them from a donor board

Edit: No it is not sorry, we are close

Edit 2: Nothing mate the connector is made by japanese company called SMK but I have not found nothing else.
People use to use flux + quick alloy for this type of connectors they solder and they remove it at 170C max

http://uk.farnell.com/webapp/wcs/sto...&storeId=10151

 

[XooP]

Ok, Ill try to remove from a donor board, thank you

 

[XooP]

Got one of another board, used an exacto knife instead of heat

 

[larossmann]

I would love to see how this worked!

 

[XooP]

What do you mean Louis? How I got it off with a knife or if I got it to work?
Well, it works now