Search results

  1. Gurmon

    820-3435-B NO BACKLIGHT, ic is not sending boost signal.

    yep, pretty much. if the feedback path is missing run wire from feedback pad to pin 2 D7701.
  2. Gurmon

    [SOLVED]820-00138 No Sound

    Might still be corrosion under u6201, bad chip, or broken/corroded HDA line back to PCH.
  3. Gurmon

    [SOLVED]820-3332 no fan spin

    Do you have PP3V3_S5 ? Voltage on pin 2 of R7941 ?
  4. Gurmon

    820-3115 power on start 3sn stop

    Resistance between pin 17 & 18 on U7000 ? Is battery detected in OSX ?
  5. Gurmon

    [SOLVED]820-00138 No Sound

    Any history of the board ? Liquid etc ? Have you tried known good OSX image as a starting point ?
  6. Gurmon

    2010 MacBook Pro won't start when power button is pushed.

    Does the charge light turn green when you press the power button ? Basically is it doing a smc reset ?
  7. Gurmon

    Avoid L2 Computer unless you want junk: 820-2914 216-0810005

    Avoid these as well http://www.ebay.co.uk/itm/DC-2012-Original-New-AMD-216-0810005-216-0810005-GPU-Graphic-Chipset-/331301647955? Promised +2012 with printed chip number, but what turned up was 1608 &.1512 in the same reel. Has anyone managed to get good 0005, 0001 or 9000 lately ? Wasn't...
  8. Gurmon

    820-3115 fan fan spin 3 seconde

    you need a scope, or just replace it. Whats u6100 area like ?
  9. Gurmon

    Corrosion everywhere on 820-00165

    Game over.....The End.
  10. Gurmon

    A1286 820-3330 can't boot into OS,light video distortion

    Hi Roy, sorry, haven't got round to it yet. Spent day support stuff. Im back on the board stuff tomorrow.
  11. Gurmon

    820-2915 Ram slot failure after GPU rework

    Duke, which rework station do you use ? Just interested.
  12. Gurmon

    820-3330 Green Light, No Power

    SMC should be sending out SMC_BATLOW_L. Check Pull up R5040.
  13. Gurmon

    820-2915 Ram slot failure after GPU rework

    Its got to do with the way you are doing the rework,or holding the board down. Its never fixable permanently (afaik). Obviously you know what your doing, you may want to tweek your profile a little. I've done +100 of these, and not a single RAM slot failure. (Famous last words)
  14. Gurmon

    820-3787 with screen artefacts and boiling U2800

    In schematic, you'll see u2800 doesn't have a lot to do with the internal display port. Start from j8300 work backwards from there. There is not a lot to check. Can you post a pick of these artifacts, im just curious ?
  15. Gurmon

    820-2850

    Anything on external display ?
  16. Gurmon

    820-3332 mux

    No idea now. Other than a broken/corroded trace somewhere, what else can it be.
  17. Gurmon

    J9001 for 820-2828

    i doubt you'll be able to buy a single one. Part number 53780-8606 made by Molex. onlinecomponents.com has these. Personally i'd go donor route unless you can rig something else together.
  18. Gurmon

    A1286 820-3330 can't boot into OS,light video distortion

    is this ohms or diode mode voltage drop ? if its ohms, its way to low. Probably dead vRam or GPU or both.
Top