For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
I was able to find the shorted cap and now macbook powers on, however can anyone tell me why I can only change the amps on my power supply and not the volts, is it my power supply that is faulty? btw the middle button is to stop the output.
Hi everyone,
I have an 820-00165, the board looks new and has a green light but no power.
noticed that F7140 has 8.6v on pin 1 but 0v on Pin 2, I can also see that there is short to ground on pin 2.
I just bought myself a power supply and connected black wire to the screw hole and red to...
Got a 820-00165 board, liquid damaged. Back of the board looks new with no corrosion, the front has burned components, and the previous owner ripped some of the G3H components while cleaning the board.
all the pads of the missing components are missing too, is it still fixable if so what should...
This board came from a liquid damage mac,has corrosion on C1902 and C1922, rest of board looks clean with no corrosion or burned looking components.
Tried to boot up via my external ssd, came up with kernel panic, then tried a known good ssd and it booted fine, noticed that the camera stayed...
this board came from a macbook with a broken display, the casing was dented from the corner.
No liquid damage, looked brand new untouched from inside. I replaced the display and ran diagnostic, came up with an error " There may be an issue with the display", tried another known good display...
The mac had a liquid spill (keyboard was sticky), the previous owner cleaned the board and it was working fine.
when I got the MacBook, the board was clean and it was working just fine, I
reinstalled the os and when a customer came to buy it, it just died!
I disconnected the battery and...