Search results

guys, a friend of mine is saying the following disable amd graphics in bios and use only intel take two resistor-in pic short bios pin 3 to gnd anyone try this or have more info? kind regards

Hello, as the titles says I got a water damage macbook pro (820-3332) with no power or green light at the mag safe. My voltages on the main lines are the following: PPBUS_G3H 0v, PP3V42_G3H 3.42v, and PPDCIN_G3H 20.62v. I have taken a look at my line PPBUS_G3H and noticed that I have a short on...

Hello everyone, I got a Macbook Pro A1502 (820-3476) that was previously water damaged. Its running super slow. There isn't any corrosion on the logic board. After running the ASD I noticed there was a problem with my camera sensor. I troubleshooted this circuit and found a short on...

anyone have experience using this in order to recover sms?

got a 5s here drains battery pretty quick, not liquid. this is most likely tristar?

I have a water damaged 6s that I repaired backlight issue after crest. Customer said battery was draining fast, so I told them I would replace it and it worked for a day or two but now phone is bootloop/stuck on logo/flashing logo. does anyone have any advice? kind regards UPDATE: So I have...

I have a water damaged one here that works fine except for selecting an item by trackpad and the fact that after some time the clock goes incorrect and then internet stops working until the clock is corrected. any advice for this one?

I guess this means sys_one_wire is not working is this correct? I am also only getting 8.18V on C7563 PPBUS_G3H, this is low right?

Was wondering if there could be an iPhone section since I would bet lots of us here do iPhone repairs. thanks!

So I hired a new guy who has a full time job as some type of engineer. He is new to Canada and said that back is his country he did fix a couple iPhones and a few odds, nothing serious, he was sure to let me know he wasn't a superstar or anything. He did great his first day with regular repairs...

So here is the story, guy comes in to fix samsung s6 lcd. I do the fix and notice the screen he was using had some corrosion on it. I ask him upon pickup when he got the phone wet. He says he never did, we know this to not always be the truth. Then he says he recently bought it as new and I knew...

f9800 12.6V r9808 pin1 12.61 pin2 12.24 R9802 pin1 12.61 pin 2 12.24 R9809 pin 1 12.07 pin2 12.61 Q9806 Pin 1=0V pin2=0V pin3=12.24 pin4=12.6 pin5=0V pin6=0v L9701=0V pin 1 and 2 u9701 pin23=0V

Got myself a water damaged 820 2879 green light and no fan spin. ppbus_g3h =12.59 pp3v42=present pin 14 u7000 3.24 smc_bc_acok 3.34v pp3v3_s5 not sure if any of those measurements help. kind regards

I was wondering if anyone had a small list of parts I should order to keep on hand

Now, this might come off as narcissistic, which is the exact opposite of what I am trying to get across here but I am gonna give 'er a go anyhow. I didn't graduate high school. I had an 8088 way back when I was 12, I am 40 in April. I had no computer until I started modding original xbox a year...

f9700 pin1 12.5 not holding steady. r9788=12.5 r9782=12.5 r9789=12.2 pin 5 9707=.5 q9706 pin 4=12.5 q9707 pin 3=11.9 q9706 pin 3=12.17 PP3V_SO=3.2 I saw corrosion by pin 6 on 9707 and the pad near it relating to PPBUS_SW_LCDBKLT_PWR R2055=0.3 my guess is that i replace 9707 based on corrosion...

PPBUS_G3H = 8.38 PP3V42_G3H= 3.39 SMC_RESET_L = 3.42 SMC_BC_ACOK= 3.19-3.29 but jumps around there a lot. I am of course unsure what to do now. thanks in advance for any help!

So far the forum for me has been a huge bargain. It gave me the confidence to take on MacBook repairs. I got at least two completed and one I think is done but will know more tomorrow when I put it back together. I have been doing these in my spare time at the store. here is my jobs so far 1...

I have no clue where to start, I got lucky by having a few donor boards for my last jobs and was able to just swap out clearly damaged parts. Where should I start for this one? kind regards

I understand this could be a retarded question. I have this a1278 and after a beer spill I only get green light on charger. I did ultrasonic. and thus far when I plug in only the cpu gets very hot. Sorry but I do not have a clue where to start. kind regards