Looks like your lucky day; should be just a shorted cap.
If you are sure about coils measurments, then is safe to inject voltage on PPBUS_G3H.
Start with 1V, as you have a pure short practically (0.3 ohm).
You will need powerfull lab power supply; more than 10A required at 1V maybe.
If you are sure about coils measurments, then is safe to inject voltage on PPBUS_G3H.
Start with 1V, as you have a pure short practically (0.3 ohm).
You will need powerfull lab power supply; more than 10A required at 1V maybe.